Figure Sculpture (SC260-5, SC360-5, SC460-5)

Sculpture II (SC280)

FALL SEMESTER WILL CONSIST OF 3 FIGURES 24", 26" and 28"

If Standing Armature:

• 16 x 20 x ¾ inch plywood board.

• Two 20 inch runners.

• ½ inch flange.

• ½ x 18 inch pipe.

• ½ inch saddle T or elbow.

• ½ to ¼ inch reducers

• ¼ x 6 inch pipe.

• 1/4 inch T

• 3/16 inch aluminum wire (one roll.)

• 1/16 inch aluminum wire (one roll.)

• Four ¼ x 1¼ inch stove bolts, nuts, washers.

• Ten 1¼ inch nails.

• Oil base clay firm or regular, approx. 30 lbs or water based clay.

  If Seated Armature:

• 16 x 20 x ¾ inch plywood board.

• ½ inch flange.

• 2, 4, 6 or 8 x ½ inch pipe (choose one depending on the pose.)

• 3/16 inch wire (one roll.)

• 1/16 inch wire (one roll.)

• Two 20 inch runners.

• Four ¼ x 1¼ inch stove bolts, nuts, washers.

• Ten 1¼ inch nails.

• Oil base clay firm or regular, approx. 30 lbs or water based.

Sculpture Concepts III (SC370-5)

Armature for a 24” figure:

• 16 x 20 x ¾ inch plywood board.

• Two 20 inch runners.

• ½ inch flange.

• 18 inch pipe.

• ½ inch saddle T.

• ¼ to ½ inch reducer.

• ¼ x 6 inch pipe.

• ¼ inch T.

• 3/16 inch or 1/8 inch aluminum wire.

• 1/16 inch aluminum wire.

• Four ¼ x 1¼ inch stove bolts, nuts and washers.

• 1¼ inch nails.

• Extra firm or firm oil base clay, approximately 40 lbs.